Designfax weekly eMagazine

Subscribe Today!

Archives

View Archives

Partners

Manufacturing Center
Product Spotlight

Modern Applications News
Metalworking Ideas For
Today's Job Shops

Tooling and Production
Strategies for large
metalworking plants

Beverage industry conveyor pours on advantages in distribution center

Motion Industries' two new Canadian distribution centers adopted low-friction Emerson System Plast conveyor chain and Nolu S wear strips to reduce noise and energy consumption. The systems utilize six Browning premium-efficiency gearmotors with gearboxes assembled on site at Motion's distribution center. End caps on the motors and bearings protect the rotating shafts.

 

 

 

 

Motion Industries' two new Canadian distribution centers have no bottling lines, but that didn't stop the company from adopting a conveyor solution widely used in the bottling industry, where the system's low-friction components have proven to reduce operating costs.

Designed by a Montreal-based OEM, the new flat-top conveyors use System Plast chain and Browning geardrives from Power Transmission Solutions, a division of Emerson Industrial Automation. The ultra-low-friction conveyor has delivered a range of advantages, including low noise, compactness, and low energy use. According to Tom Sawyer, Motion's distribution center director, the conveyor is much quieter than a roller conveyor, vastly improving the work environment, and it has proven very reliable, conveying totes without the drift that can occur on a gravity roller conveyor. He emphasizes the new conveyor demonstrates the plastic chain's advantages beyond a washdown environment.

According to Tom Sawyer, Motion's distribution center director, the System Plast conveyor is much quieter than roller conveyor. He emphasizes the flat-top conveyor demonstrates the plastic chain's advantages beyond a bottling/washdown environment, where it is often used.

 

 

 

 

Motion Industries Canada opened its two new distribution centers (DCs) in August 2011, one in Edmonton and another in Montreal, replacing its single DC in Montreal and nearly quadrupling its size to 100,000 sq. ft. with the new facility. Both facilities have a conventional layout, with shipping and receiving on opposite ends of the building, and shelved inventory in the center. The shelves branch off at right angles to the shipping conveyor, which runs down the center of the layout to a 90-degree turn and then to a 180-degree turn leading to five shipping lanes, each for a specific Canadian province.

"Our two DCs serve our 70 branches in Canada, and we also ship some product directly to customers," Sawyer says. "We pick 2,000 to 2,400 lines per day for our branches, and each line may consist of many pieces of a specific product. Our warehouse management software consolidates orders from the branches so our pickers, using RF scanners, can efficiently pick in the same zone for multiple accounts. The product is regrouped in shipment, and a given branch may have several hundred lines going to it every day. We also pick about 200 orders per day for direct shipment to customers."

Motion's two systems include 180-degree turns in a 6-ft radius, measured on the outside of the conveyor, a compact arrangement that is almost impossible using roller conveyor without transfer tables or pushers.

 

 

 

 

Motion's prior DC used two-level gravity and powered roller conveyor. In the new DC, Motion looked for ways to reduce noise, eliminate maintenance, and improve safety.

Motion teamed with a Quebec OEM to design its DC conveyors. It was decided that the best product for the application was the flat-top System Plast conveyor, using XPG chain and Nolu S wear strips. This combination has a coefficient of friction of just 0.16, reducing energy consumption about 25%, compared to standard acetal chain and UHMW-PE wear strips. The XPG chain is also rated for 607 lb, adequate for the 50-lb maximum tote weight handled at Motion's facilities.

"This type of belt proved ideal for a compact system layout," Sawyer says. "For example, we did a 180-degree turn in a six-foot radius, measured on the outside of the conveyor. This is almost impossible with roller conveyor without transfer tables or pushers. Each of our systems includes a section of about 40 feet of accumulation conveyor with a cleverly designed surface that minimizes load and energy use. We use the accumulation section to spot-check our totes for picking accuracy." Automatic sorting to the shipping lanes is planned for late 2012, using scanners and pushers, with manual sortation being used in the short term.

The new conveyor systems use six Browning 575-V premium-efficiency gear motors, with the gearboxes assembled on site at Motion's DC, which is home to the company's largest assembly shop in North America. End caps on the motors and bearings protect the rotating shafts. The conveyor requires no compressed air in its accumulation zones, and reduces maintenance with elimination of belt-driven rollers.

"We've been surprised by the low noise level of this system, which enhances the workplace, and the conveyor has proven highly reliable," Sawyer says. "The totes are more secure on the chain than on rollers, much less likely to drift. The chain will actually realign totes slightly, and it easily transports them 175 feet to the first turn. We are quite pleased with the outcome and the results of the installation."

An interactive page-flip version of the System Plast catalog is online at www.emersononlinecatalog.com.

Printed copies can be ordered at www.emerson-ept.com.

Source: Emerson Industrial Automation

Published July 2012

Rate this article